Connecting clamps, joint clamp

For thread of bolt M 5 to M 24, for connecting cable diameter 1,5 f - 240 f, 25 m - 300 m

Type Connecting cable diameter For bolt Threads
Connecting clamps
29-94/210-08-f-08 16f – 70f sq.mm + 25m – 70m sq.mm
M 8
29-94/210-08-f-10 16f – 70f sq.mm + 25m – 70m sq.mm
M 10
29-94/210-08-h-08 25f – 95f sq.mm + 35m – 120m sq.mm
M 8
29-94/210-08-h-10 25f – 95f sq.mm + 35m – 120m sq.mm
M 10
29-94/220-12-h-10 70f – 185f sq.mm + 95m – 240m sq.mm
M 10
29-94/220-12-h-12 70f – 185f sq.mm + 95m – 240m sq.mm
M 12
29-94/220-12-p-10 16f – 95f sq.mm + 25m – 120m sq.mm
M 10
29-94/220-12-p-12 16f – 95f sq.mm + 25m – 120m sq.mm
M 12
29-94/230-12-h-12 95f – 240f sq.mm + 120m – 300m sq.mm
M 12
29-94/230-12-h-16 95f – 240f sq.mm + 120m – 300m sq.mm
M 16
29-94/230-12-p-12 16f – 185f sq.mm + 25m – 240m sq.mm
M 12
29-94/230-12-p-16 16f – 185f sq.mm + 25m – 240m sq.mm
M 16
Connecting clamps
29-94/240-Fa-08 16f – 50f
M 8
29-94/240-Fa-10 16f – 95f
M 10
29-94/240-Fa-12 25f – 185f
M 12
29-94/240-Fa-16 35f – 300f
M 16
29-94/240-Fa-20 35f – 300f
M 20
29-94/240-Fa-24 35f – 300f
M 24
29-94/240-K-08 16f – 50f
M 8
29-94/240-K-10 25f – 95f
M 10
29-94/240-K-12 25f – 185f
M 12
29-94/240-K-16 35f – 300f
M 16
29-94/240-K-20 35f – 300f
M 20
29-94/240-K-24 35f – 300f
M 24

Joint clamps

Type Connecting cable diameter Thread of bolt
29-94/168-M 5 Bis max. 25 mm Ø M 5
29-94/169-M 6 Bis max. 25 mm Ø M 6
29-94/171-M 8 Bis max. 35 mm Ø M 8

Emil A. Peters GmbH und Co KG supplies joint clamps, screw-type terminals and connecting terminals.

Joint clamps are available for M5 to M8 stud threads.

The connection cross section of joint clamps is between max 25 mm2 and max 35 mm2..

Joint clamps with M5, M6 and M8 studs have been type approved with flameproof conductor bushings PLD5/690, PLD6/690 and PLD8/690.

Screw-type terminals are available for M8 to M16 studs.

The connection cross section of screw-type terminals is between 16f mm2 and 300 mm2.

Screw-type terminals can be used for all flameproof conductor bushings with M or M‘ connector.

Screw-type terminals are ATEX-approved (PTB 98 ATEX 3111U)

Connecting terminals are available for M8 to M24 stud threads.

The connection cross section of connecting terminals is between 16 mm2 and 300 mm2.
Connecting terminals come as “Fa” and “K” versions.